Pattarapol Ruangutai Resume
EXPERIENCE
Sunnect Lighting, LLC From: April 2018 – To: Present
Street: 11 W Del Mar Blvd, Suite 200 City: Pasadena State: CA Zip Code: 91105
Project Engineer
• Performed financial analysis of lighting projects to determine the most optimal energy saving solution for customers
• Efficiently draft project proposals presenting technical data and detailed project economics to customers
• Managed a team of certified electricians to perform LED retrofits throughout the U.S.
• Established protocols needed to create and maintain a database of audits, proposals, purchase orders, and materials information for a nationwide portfolio
• Tracked project schedules, budget, and cost for analysis
• Communicated effectively with customers to resolve issues that arise from ongoing and completed projects
• Provided leadership support to multiple departments in the company
• Facilitated communication between customers and crews on-site to ensure all project requirements are met
Material and Equipment Manager
• Procured lighting materials and equipment for projects throughout the U.S.
• Organized materials and equipment to ensure warehouse is fully stocked and ready for upcoming projects
• Managed and scheduled material delivery to job sites all over the U.S.
• Constantly optimized a list of preferred vendors to obtain new and high quality materials and equipment
• Kept track of material and equipment inventory after each project
Crescenta Valley Theater Arts From: September 2010 –To: June 2011
Street: 2900 Community Ave City: La Crescenta State: CA Zip Code: 91214
Assistant Sound Technician
• Performed sound check for the entire cast before performance
• Ensured timing of sound tracks throughout the show
• Setup and take down sound system after each show
• Adjusted sound level and quality as necessary throughout the show
Set Construction / Prop Assistant
• Assisted in creating various backdrops used in the performance
• Managed a small crew in building simple and complex set pieces such as a small waterfall, staircase, living room, etc.
• Acquired and tracked all props used in the show
• Coordinated with crew members to create simple effects such as fog
• Worked in a small team to smoothly setup and teardown props, backdrops, and set pieces for each show
EDUCATION
University of California, Los Angeles (UCLA)
From: September 2015 – To: December 2017
Street: 405 Hilgard Ave City: Los Angeles State: CA Zip Code: 90095
Bachelor of Science, Mechanical Engineering
Cumulative GPA 3.59
Relevant Coursework: Dynamic Systems Modeling and Control, Advanced Strength of Materials, Computer Aided Design & Drafting, Complex Systems, Mechanical Design, Manufacturing Processes, Transport Phenomena, Engineering Thermodynamics, Intermediate Mechanisms & Mechanical Systems, Intermediate Dynamics
Pasadena City College
From: September 2011 – To: June 2015
Street: 1570 E Colorado Blvd City: Pasadena State: CA Zip Code: 91106
Complete Lower Division Courses, Mechanical Engineering
Cumulative GPA 3.85
TECHNICAL SKILLS
Software: Proficiency in SolidWorks, AutoCAD, SQL, Microsoft Office, Excel, PowerPoint, SnapCount
Programming Language: C++, Visual Basic, Simulink, LabVIEW, MATLAB
Machines: Mill, Lathe, CNC, Sander, Band Saw, Drill Press
Language: Fluent in English and Thai
UCLA ENGINEERING PROJECTS
Robotic Controls: Autonomous Delivery Robot
From: January 2018 – To: June 2018
• Collaborated in a team of 6 students to design, develop, and program an autonomous, propeller-driven robot
• Utilized LabVIEW software to derive algorithms to program servo motors and brushless motors for active steering and braking
• Performed field testing of IR sensors, servomotors, and brushless motors to gather real-time data
• Constructed a circuit board to act as a central interface between MCU (MyRIO-1900) and the robot
• Analyzed system data using LabVIEW and Simulink to debug programs and test for system failure
Manufacturing/Assembly: Aluminum Chair and Delivery Robot
From: September 2017 – To: June 2018
• Fabricated the delivery subsystem for an autonomous robot using 3D printers
• Coordinated with team members to assemble each subsystem into the autonomous robot
• Manufactured MCU (MyRIO-1900) support structures by operating a lathe, sander, milling machine, drill press, band saw and other shop equipment
• Manufactured sensor, motor, and servomotor mounts by operating a CNC machine and 3D printers
• Modeled the aluminum chair back using SolidWorks, and operated a CNC machine to fabricate chair back, seat, and legs
CAD Design of Mechanical Systems: Rubber Band Powered Vehicle and Delivery Robot
From: July 2017 – To: January 2018
• Drafted 3D CAD models and drawings of a delivery subsystem for a propeller-driven, autonomous delivery robot using SolidWorks
• Collected data from SolidWorks FEA for analysis and correction of the system’s structural weaknesses
• Communicated clearly with team members for data analysis and implementation of successive design changes to meet requirement specifications
• Compiled design documentations at each phase of the design process to communicate effectively with team members and leaders
LEADERSHIP EXPERIENCE
NASA Community College Aerospace Scholars Participant
From: May 2015 – To: May 2015
Street: 2825 E Ave P City: Palmdale State: CA Zip Code: 93550
Lead Programmer
• Delegated responsibilities to team members for the design, assembly, and programming of a mechanical system
• Responsible for overseeing the programming process of the system by team members
• Monitored team members’ progress using scheduled task completion dates to meet project’s deadline
EXPERIENCE
Sunnect Lighting, LLC From: April 2018 – To: Present
Street: 11 W Del Mar Blvd, Suite 200 City: Pasadena State: CA Zip Code: 91105
Project Engineer
• Performed financial analysis of lighting projects to determine the most optimal energy saving solution for customers
• Efficiently draft project proposals presenting technical data and detailed project economics to customers
• Managed a team of certified electricians to perform LED retrofits throughout the U.S.
• Established protocols needed to create and maintain a database of audits, proposals, purchase orders, and materials information for a nationwide portfolio
• Tracked project schedules, budget, and cost for analysis
• Communicated effectively with customers to resolve issues that arise from ongoing and completed projects
• Provided leadership support to multiple departments in the company
• Facilitated communication between customers and crews on-site to ensure all project requirements are met
Material and Equipment Manager
• Procured lighting materials and equipment for projects throughout the U.S.
• Organized materials and equipment to ensure warehouse is fully stocked and ready for upcoming projects
• Managed and scheduled material delivery to job sites all over the U.S.
• Constantly optimized a list of preferred vendors to obtain new and high quality materials and equipment
• Kept track of material and equipment inventory after each project
Crescenta Valley Theater Arts From: September 2010 –To: June 2011
Street: 2900 Community Ave City: La Crescenta State: CA Zip Code: 91214
Assistant Sound Technician
• Performed sound check for the entire cast before performance
• Ensured timing of sound tracks throughout the show
• Setup and take down sound system after each show
• Adjusted sound level and quality as necessary throughout the show
Set Construction / Prop Assistant
• Assisted in creating various backdrops used in the performance
• Managed a small crew in building simple and complex set pieces such as a small waterfall, staircase, living room, etc.
• Acquired and tracked all props used in the show
• Coordinated with crew members to create simple effects such as fog
• Worked in a small team to smoothly setup and teardown props, backdrops, and set pieces for each show
EDUCATION
University of California, Los Angeles (UCLA)
From: September 2015 – To: December 2017
Street: 405 Hilgard Ave City: Los Angeles State: CA Zip Code: 90095
Bachelor of Science, Mechanical Engineering
Cumulative GPA 3.59
Relevant Coursework: Dynamic Systems Modeling and Control, Advanced Strength of Materials, Computer Aided Design & Drafting, Complex Systems, Mechanical Design, Manufacturing Processes, Transport Phenomena, Engineering Thermodynamics, Intermediate Mechanisms & Mechanical Systems, Intermediate Dynamics
Pasadena City College
From: September 2011 – To: June 2015
Street: 1570 E Colorado Blvd City: Pasadena State: CA Zip Code: 91106
Complete Lower Division Courses, Mechanical Engineering
Cumulative GPA 3.85
TECHNICAL SKILLS
Software: Proficiency in SolidWorks, AutoCAD, SQL, Microsoft Office, Excel, PowerPoint, SnapCount
Programming Language: C++, Visual Basic, Simulink, LabVIEW, MATLAB
Machines: Mill, Lathe, CNC, Sander, Band Saw, Drill Press
Language: Fluent in English and Thai
UCLA ENGINEERING PROJECTS
Robotic Controls: Autonomous Delivery Robot
From: January 2018 – To: June 2018
• Collaborated in a team of 6 students to design, develop, and program an autonomous, propeller-driven robot
• Utilized LabVIEW software to derive algorithms to program servo motors and brushless motors for active steering and braking
• Performed field testing of IR sensors, servomotors, and brushless motors to gather real-time data
• Constructed a circuit board to act as a central interface between MCU (MyRIO-1900) and the robot
• Analyzed system data using LabVIEW and Simulink to debug programs and test for system failure
Manufacturing/Assembly: Aluminum Chair and Delivery Robot
From: September 2017 – To: June 2018
• Fabricated the delivery subsystem for an autonomous robot using 3D printers
• Coordinated with team members to assemble each subsystem into the autonomous robot
• Manufactured MCU (MyRIO-1900) support structures by operating a lathe, sander, milling machine, drill press, band saw and other shop equipment
• Manufactured sensor, motor, and servomotor mounts by operating a CNC machine and 3D printers
• Modeled the aluminum chair back using SolidWorks, and operated a CNC machine to fabricate chair back, seat, and legs
CAD Design of Mechanical Systems: Rubber Band Powered Vehicle and Delivery Robot
From: July 2017 – To: January 2018
• Drafted 3D CAD models and drawings of a delivery subsystem for a propeller-driven, autonomous delivery robot using SolidWorks
• Collected data from SolidWorks FEA for analysis and correction of the system’s structural weaknesses
• Communicated clearly with team members for data analysis and implementation of successive design changes to meet requirement specifications
• Compiled design documentations at each phase of the design process to communicate effectively with team members and leaders
LEADERSHIP EXPERIENCE
NASA Community College Aerospace Scholars Participant
From: May 2015 – To: May 2015
Street: 2825 E Ave P City: Palmdale State: CA Zip Code: 93550
Lead Programmer
• Delegated responsibilities to team members for the design, assembly, and programming of a mechanical system
• Responsible for overseeing the programming process of the system by team members
• Monitored team members’ progress using scheduled task completion dates to meet project’s deadline