My CV
RESUME
ROSHAN PASHA
#500, 7th Main, 8thCross, kaverinagar Banashankari 2nd Stage Bangalore-560070
e-mail: ------------ Tel.No: ------------
Objective
To execute the given work effectively in an organization and also to gain more Experience. Moreover, to serve the firm or the organization faithfully.
Educational Qualifications
QUALIFICATION
INSTITUTION&UNIV- ERSITY
YEAR OF COMPLETI ON
PERCENTAGE (%)
B E in EEE
NIT&MS(VTU)
2012-2015
64.73%
Diploma in Electrical Electronic
K.I.E.T Polytechnic (BTE)
2008-2011
61.57%
SSLC
KNMM(KAMALA NEHRU MAKKLA MANDIRA) KARNATAKA BOARD
2007-2008
60.98%
Professional Experience
MOTOROLA INDIA PVT LTD. Through (2011)
Johnson Controls India Pvt ltd
Designation: Technician Dept: Facility. Salarpuria supreme Marathahali Bangalore
RLogic Technology PVT LTD. (August 2015-July2016)
Designation: Technician
Dept: Power Supply Unit
J.P Nagar, Kanakapura Main Road Bangalore-560078
Presently Working : In Construction field As Site engineer. NN constructions PVT LTD (August 2016 – till date) Designation: Site engineer
Jayanagar 7th block, Kanakapura Main Road Bangalore-560082
I’m site engineer for three residential building in jayanagar. One project of 4 floor building is in finishing condition (as on of January 2019)
Technical Qualifications
? Basic computer
a. Micro Soft Power Point
b. Micro Soft Word c. Micro Soft Excel d. Dos
? Auto CAD
a. 2D electrical design
? PLC & SCADA Training by YOKOGAWA Technical school Bangalore
? Pursuing a course of Civil architect
a. Auto cad
b. Rivet architecture
c. 3Ds MAX
Academic Project In Diploma
? In Diploma
Photovoltaic Solar Energy Harvesting.
ABSTRACT:-
? The system has been built for tracking the high degree of natural light intensity to receive the solar light to produce electricity. The micro controller has been programmed to track for the highest intensity of natural sun light this state that the machine drives the motor to adjust the solar panel to receive optimum sun light.
? The photovoltaic cell converts Light energy into Electrical energy, which is stored in rechargeable battery to glow lights or run fan. The photovoltaic cell produces 3 volts and 1 amp current to drive LED and Fans
? The 8 channel ADC is housed with Photo Sensor, which senses the light intensity. The ADC gives the accurate measurement of light intensity, which varies from 0 – 255 and fed to micro controller to display on 16 X 2 LCD.
? The micro controller is connected to stepper motor through motor drive circuitry having ULN 2803 as a motor driving IC. The motor is driven around 180 degree to track the sun from East to West.
This Project Work has been done under “Ampere Technology Pvt. Ltd.” By the guidance of Mr. Raghavendra.
? In ENGINEERING
DC Motors speed synchronization for rolling mills
ABSTRACT:-
? Industrial environment in day-to-day life demands for a synchronization between multiple devices present in the industry. One among such application is the synchronization between multiple devices available in the industries. So there should be a common synchronization between all these motors. Among the available motors even of single motors RPS is more the loss may be more. So keeping all these factors into consideration we designed a system, which is capable of driving multiple DC motors with the same speed, or RPS without any approximation. Engineering
? The project aims at designing a system which is capable of synchronizing the speed of the slave motor (motor-2) with the master motor (motor-1). This system finds very useful in paper mills, steel industries etc..,. The master motor speed can be set manually through the potentiometer available in the system.
? This is achieved by making use of a controller based mother board which uses a uniquely designed power supply, two DC motors, Speed sensing sensor, LCD display. One of the motor acts as a follower while the other motor n speed can be set manually.
? The speed synchronization is provided with the help of the PMW technique. An LCD is provided with the controller for displaying the information for user interface. The controller is also provided with a potentiometer to set the speed of master motor.
Achievements
? Secured many prizes in inter college competition.
? Won awards for sports at school level.
Personality traits
? Adaptable.
? Team Oriented.
? Dedicated.
Personal Profile
? Father’s Name
? Date of Birth
? Languages Known
? Gender
? Martial Status
? Nationality
? Hobbies & interests
Declaration
: LATE. MUNVAR SHAREEF
: MAY 26 1993
: English, Kannada, Hindi and Urdu : Male
: Single
: Indian
: Watching movies , cricket
Matches.
I have the capability to work in interdisciplinary environments and love to work as a team contributor. I assure my fullest energy and efforts if I am given the opportunity to fulfill my ardent desire to be among the dedicated researchers / consultants where I can also nurture and dedicate myself to be one of the best.
DATE:
PLACE: (ROSHAN PASHA)
RESUME
ROSHAN PASHA
#500, 7th Main, 8thCross, kaverinagar Banashankari 2nd Stage Bangalore-560070
e-mail: ------------ Tel.No: ------------
Objective
To execute the given work effectively in an organization and also to gain more Experience. Moreover, to serve the firm or the organization faithfully.
Educational Qualifications
QUALIFICATION
INSTITUTION&UNIV- ERSITY
YEAR OF COMPLETI ON
PERCENTAGE (%)
B E in EEE
NIT&MS(VTU)
2012-2015
64.73%
Diploma in Electrical Electronic
K.I.E.T Polytechnic (BTE)
2008-2011
61.57%
SSLC
KNMM(KAMALA NEHRU MAKKLA MANDIRA) KARNATAKA BOARD
2007-2008
60.98%
Professional Experience
MOTOROLA INDIA PVT LTD. Through (2011)
Johnson Controls India Pvt ltd
Designation: Technician Dept: Facility. Salarpuria supreme Marathahali Bangalore
RLogic Technology PVT LTD. (August 2015-July2016)
Designation: Technician
Dept: Power Supply Unit
J.P Nagar, Kanakapura Main Road Bangalore-560078
Presently Working : In Construction field As Site engineer. NN constructions PVT LTD (August 2016 – till date) Designation: Site engineer
Jayanagar 7th block, Kanakapura Main Road Bangalore-560082
I’m site engineer for three residential building in jayanagar. One project of 4 floor building is in finishing condition (as on of January 2019)
Technical Qualifications
? Basic computer
a. Micro Soft Power Point
b. Micro Soft Word c. Micro Soft Excel d. Dos
? Auto CAD
a. 2D electrical design
? PLC & SCADA Training by YOKOGAWA Technical school Bangalore
? Pursuing a course of Civil architect
a. Auto cad
b. Rivet architecture
c. 3Ds MAX
Academic Project In Diploma
? In Diploma
Photovoltaic Solar Energy Harvesting.
ABSTRACT:-
? The system has been built for tracking the high degree of natural light intensity to receive the solar light to produce electricity. The micro controller has been programmed to track for the highest intensity of natural sun light this state that the machine drives the motor to adjust the solar panel to receive optimum sun light.
? The photovoltaic cell converts Light energy into Electrical energy, which is stored in rechargeable battery to glow lights or run fan. The photovoltaic cell produces 3 volts and 1 amp current to drive LED and Fans
? The 8 channel ADC is housed with Photo Sensor, which senses the light intensity. The ADC gives the accurate measurement of light intensity, which varies from 0 – 255 and fed to micro controller to display on 16 X 2 LCD.
? The micro controller is connected to stepper motor through motor drive circuitry having ULN 2803 as a motor driving IC. The motor is driven around 180 degree to track the sun from East to West.
This Project Work has been done under “Ampere Technology Pvt. Ltd.” By the guidance of Mr. Raghavendra.
? In ENGINEERING
DC Motors speed synchronization for rolling mills
ABSTRACT:-
? Industrial environment in day-to-day life demands for a synchronization between multiple devices present in the industry. One among such application is the synchronization between multiple devices available in the industries. So there should be a common synchronization between all these motors. Among the available motors even of single motors RPS is more the loss may be more. So keeping all these factors into consideration we designed a system, which is capable of driving multiple DC motors with the same speed, or RPS without any approximation. Engineering
? The project aims at designing a system which is capable of synchronizing the speed of the slave motor (motor-2) with the master motor (motor-1). This system finds very useful in paper mills, steel industries etc..,. The master motor speed can be set manually through the potentiometer available in the system.
? This is achieved by making use of a controller based mother board which uses a uniquely designed power supply, two DC motors, Speed sensing sensor, LCD display. One of the motor acts as a follower while the other motor n speed can be set manually.
? The speed synchronization is provided with the help of the PMW technique. An LCD is provided with the controller for displaying the information for user interface. The controller is also provided with a potentiometer to set the speed of master motor.
Achievements
? Secured many prizes in inter college competition.
? Won awards for sports at school level.
Personality traits
? Adaptable.
? Team Oriented.
? Dedicated.
Personal Profile
? Father’s Name
? Date of Birth
? Languages Known
? Gender
? Martial Status
? Nationality
? Hobbies & interests
Declaration
: LATE. MUNVAR SHAREEF
: MAY 26 1993
: English, Kannada, Hindi and Urdu : Male
: Single
: Indian
: Watching movies , cricket
Matches.
I have the capability to work in interdisciplinary environments and love to work as a team contributor. I assure my fullest energy and efforts if I am given the opportunity to fulfill my ardent desire to be among the dedicated researchers / consultants where I can also nurture and dedicate myself to be one of the best.
DATE:
PLACE: (ROSHAN PASHA)