Juan Resume
Juan Felipe Mares
17002 Carson Dr. Horizon City
------------
------------
Graduate of ABET-accredited BSME program seeking an entry-level Mechanical Engineering position.
Summary:
Motivated Entry Level Mechanical engineer committed to safety and high performance who thrives in a fast-pace challenging environment. Organized, detail-oriented and effective professional.
Key Skills and Knowledge Areas:
Solid command of technologies, tools and best practices in designing mechanical equipment using AutoCAD, Solid Works, NX, Matlab, and engineering drawings and blueprints.
Excellent shop and safety skills honed from work as a machinist and welder. Able to design and fabricate machine tooling and mechanical test fixtures utilizing machine shop equipment: mill, lathe, tig and mig welder, vertical and horizontal saw, grinding stations, and HP DesignJet Plotter.
Knowledge of Energy and Propulsion Stations: Brayton Cycle/Gas Turbine/Jet Engine Learning Station, Rankine Cycle/Steam Turbine Learning Station, Concentrating Solar Power Experimentation System, Solar Thermal Heating Experimentation System, Heat Transfer Processes (Conduction/Convection) Experimentation System,Heat Exchanger Learning Station, Subsonic Wind Tunnel, Water Tunnel, Wind Turbine Experimentation System.
Knowledge of Structure Systems: Aerostructure Experimentation System (Bending, Torsion, Combined Loads), Systems Dynamics Experimentation Systems (Pendulum, Center of Percussion, Bifilar Suspension, Mass-Spring System, Torsional Oscillation: Single Rotor/Two Rotor/Viscous Damping, Transverse Vibration, Undamped Vibration Absorber, Free and Forced Vibrations of Rigid Body), Impact Testing Learning Station.
Knowledge of Mechatronics Stations: Twin Rotor Helicopter /Feedback Control Learning Station, Planetary Exploration Rover Learning Stations, Omni Wheel Robotics Learning Station
Strong team collaborating with team members in order to achieve engineering goals.
Education:
University of Texas at El Paso -- El Paso, TX
Bachelor of Science in Mechanical Engineering (BSME),
Graduated May 2018
Completed Courses in Major:
Graphic and Design Fundamentals, Statics, Mechanics of Materials, Materials and Manufacturing Processes, Manufacturing Engineering Lab, Dynamics, Introduction to Thermal-Fluid Science, Engineering Analysis, Electro Mechanical Systems, Thermodynamics, Fluid Mechanics, System Dynamics, Mechanical Design, Principles of Engineering Design, Mechatronics, Heat Transfer, Finite Element Analysis, Thermal System Design
Senior Design Project:
Completed senior project (which was the design of a new vehicle of our choice with set specifications given to us by the Professor of senior design) given by the College of Engineering
To design and create using CAD software an everyday vehicle that is cheap, autonomus and effective in both rural and urban areas as well as having modern technology such as lane assist parking assist and low gas mileage
Created models using AutoCAD and NX, putting the model through simulation using Engineering Simulation & 3D Design Software
Technical Skills:
Programs: AutoCAD, NX, Solid Works, Matlab, MS Word, MS Excel, Engineering Simulation & 3D Design Software | Ansys, Linux, Pro-E, CATIA, Both C and C++
Organizational skills: coordinates tasks, manages projects effectively
Interpersonal skills: works well with others, accepts responsibility, cooperates, delegates and tasks effectively,
Research and Planning: solves problems, meets goals, gathers information, analyzes issues, asses situations,
Juan Felipe Mares
17002 Carson Dr. Horizon City
------------
------------
Graduate of ABET-accredited BSME program seeking an entry-level Mechanical Engineering position.
Summary:
Motivated Entry Level Mechanical engineer committed to safety and high performance who thrives in a fast-pace challenging environment. Organized, detail-oriented and effective professional.
Key Skills and Knowledge Areas:
Solid command of technologies, tools and best practices in designing mechanical equipment using AutoCAD, Solid Works, NX, Matlab, and engineering drawings and blueprints.
Excellent shop and safety skills honed from work as a machinist and welder. Able to design and fabricate machine tooling and mechanical test fixtures utilizing machine shop equipment: mill, lathe, tig and mig welder, vertical and horizontal saw, grinding stations, and HP DesignJet Plotter.
Knowledge of Energy and Propulsion Stations: Brayton Cycle/Gas Turbine/Jet Engine Learning Station, Rankine Cycle/Steam Turbine Learning Station, Concentrating Solar Power Experimentation System, Solar Thermal Heating Experimentation System, Heat Transfer Processes (Conduction/Convection) Experimentation System,Heat Exchanger Learning Station, Subsonic Wind Tunnel, Water Tunnel, Wind Turbine Experimentation System.
Knowledge of Structure Systems: Aerostructure Experimentation System (Bending, Torsion, Combined Loads), Systems Dynamics Experimentation Systems (Pendulum, Center of Percussion, Bifilar Suspension, Mass-Spring System, Torsional Oscillation: Single Rotor/Two Rotor/Viscous Damping, Transverse Vibration, Undamped Vibration Absorber, Free and Forced Vibrations of Rigid Body), Impact Testing Learning Station.
Knowledge of Mechatronics Stations: Twin Rotor Helicopter /Feedback Control Learning Station, Planetary Exploration Rover Learning Stations, Omni Wheel Robotics Learning Station
Strong team collaborating with team members in order to achieve engineering goals.
Education:
University of Texas at El Paso -- El Paso, TX
Bachelor of Science in Mechanical Engineering (BSME),
Graduated May 2018
Completed Courses in Major:
Graphic and Design Fundamentals, Statics, Mechanics of Materials, Materials and Manufacturing Processes, Manufacturing Engineering Lab, Dynamics, Introduction to Thermal-Fluid Science, Engineering Analysis, Electro Mechanical Systems, Thermodynamics, Fluid Mechanics, System Dynamics, Mechanical Design, Principles of Engineering Design, Mechatronics, Heat Transfer, Finite Element Analysis, Thermal System Design
Senior Design Project:
Completed senior project (which was the design of a new vehicle of our choice with set specifications given to us by the Professor of senior design) given by the College of Engineering
To design and create using CAD software an everyday vehicle that is cheap, autonomus and effective in both rural and urban areas as well as having modern technology such as lane assist parking assist and low gas mileage
Created models using AutoCAD and NX, putting the model through simulation using Engineering Simulation & 3D Design Software
Technical Skills:
Programs: AutoCAD, NX, Solid Works, Matlab, MS Word, MS Excel, Engineering Simulation & 3D Design Software | Ansys, Linux, Pro-E, CATIA, Both C and C++
Organizational skills: coordinates tasks, manages projects effectively
Interpersonal skills: works well with others, accepts responsibility, cooperates, delegates and tasks effectively,
Research and Planning: solves problems, meets goals, gathers information, analyzes issues, asses situations,