Experienced Drafter
2016-Present CAD Detailer Mc-2, Las Vegas NV/Kingman AZ
• Create 3d model of exhibit booth in cad, using standards, blocks, and custom build pieces to scale in AutoCAD
• Produce complete set up drawings to build exhibit booths. This includes Cover page, Baseplate layouts, carpet plans, electric, AV, air, rigging, floor plan, panel labeling plans, graphic elevations, details, section views, assembly drawings.
• Create shop drawings for custom structures for the shop to build, including finishes, hardware, dimensions.
• CNC programming using SolidCIM and RouterCIM for custom items being built in the shop
• Correct any redline corrections, additions, or modifications
• Plot set up packages in PDF form and hard copies using plotter
2015-2016 3D Plumbing Designer Universal Plumbing, LLC, Las Vegas NV
• Create 3D drawings using AutoCad and PD3D program from 2D CAD drawings.
• Create spool sheets for prefab in house, Bill of Material Lists, Layout and Dimensioning for layout of pipe during construction
• Verify that Footings will not hinder installation of in ground piping
• Verify that walls/chases are wide enough to fit WC carriers
2015-2015 Plumbing Designer Capital Engineering Consultants, Inc, Sacramento CA
2013-2015 Plumbing Drafter/Designer Strickler Associates, Fairfax VA
• Create construction and permit drawing sets for school remodels, church builds, build outs for business, using set standards.
• Researched existing plans for current locations of sanitary, storm, water, fire suppression and gas pipes.
• Create accurate demolition plans.
• Coordinate with Architect via email and phone for requesting chases, fixture relocation, updates, etc.
• Coordinate with Civil Engineer on pipes leading out of building to street, existing and new.
• Create detail new placement plans of Sanitary, Storm, water, and gas lines, including connections to existing lines inside and outside building, making sure all are up to current code.
• Create basic overview plans of fire protection for contractor to work off of for installation.
2013-2013 Civil Drafter Express Technologies, Fredericksburg, VA
• Utilize Google World and Google Maps to verify road layout, engineer's notes and GPS points to create the roadway system for cable layout.
• Properly place and label other cables, pipes and wires that are already in the ground near the location of the projected layout.
• Show details of the full layout of the cable’s location.
• Update drawings per contractor’s as-built notations.
2012-2012 Engineering Support Specialist Brazos Electric Cooperative, Waco, TX
2011-2012 Engineering Assistant/Drafter 1 Intern Brazos Electric Cooperative, Waco, TX
• Set up sheet sets for specific sites with the universal information, following specific company standards.
• Assisted drafters in making revisions to drawings.
• Worked independently and with team members, Engineers, and consultants on the remodel and construction of new sites. I worked on the sites from beginning to end.
• Plotted and printed the required number of sets, material lists, and specifications needed for the construction to begin.
• Created accurate and detailed Vicinity Maps for everyone involved in construction to get to the site; including written directions.
• Created record prints for the flat file after the work had been completed; making any changes needed to accurately reflect what is actually on site.
• Created new and updated existing single line and phasing diagrams of wiring schematics.
• Scanned multiple closed job files into the computer system in attempt to allow Brazos Electric Cooperative employees quicker and easier access to files through Electronic Document Management System. Also named files and organized according to company standards.
• Created step by step instructions for scanning in new documents for others to use.
2003-2011 Licensed Customer Service Specialist Farmers/StateFarm Oregon/Texas
• Check to ensure that appropriate changes were made to resolve customers’ problems.
• Complete contract forms, prepare change of address records, and issue service discontinuance orders, using computers.
• Confer with customers by telephone or in person in order to provide information about products and services, to take orders or cancel accounts, or to obtain details of complaints.
• Contact customers in order to respond to inquiries or to notify them of claim investigation results and any planned adjustments.
• Determine charges for services requested, collect deposits or payments, and/or arrange for billing.
• Keep records of customer interactions and transactions, recording details of inquiries, complaints, and comments, as well as actions taken.
• Obtain and examine all relevant information in order to assess validity of complaints and to determine possible causes, such as extreme weather conditions that could increase utility bills.
• Recommend improvements in products, packaging, shipping, service, or billing methods and procedures in order to prevent future problems.
• Refer unresolved customer grievances to designated departments for further investigation.
• Resolve customers’ service or billing complaints by performing activities such as exchanging merchandise, refunding money, and adjusting bills.
• Review claims adjustments with dealers, examining parts claimed to be defective and approving or disapproving dealers’ claims.
• Review insurance policy terms in order to determine whether a particular loss is covered by insurance.
• Solicit sale of new or additional services or products.
Education
2010-2012 Texas State Technical College Waco, TX
• Associate of Applied Science in Architectural Drafting
• Associate of Applied Science in Drafting & Design Technology (Mechanical/Electrical)
• GPA: 3.832
Associations
• Member of Phi Theta Kappa, (Fall10-2013)
• Member and Secretary/Treasurer of the on-campus Drafting Club, (Fall 2010-Sumer 2011)
• Skills USA Architectural Drafting and Quiz Bowl, member/competitor at state level for (2011)
• Skills USA Quiz Bowl, competitor at national level (2011)
• ASPE
Skills
• Software: strong knowledge of AutoCAD 2010-17, Microstation, iPlot and Descartes, Inventor 2012-13, Windows, Microsoft Office, Printers and Plotters
• Basic knowledge of SDS2, and Revit 2011
• Board drafting proficient
• Journeyman understanding Codes, Specifications and Contract Documents, and GD&T
• Bilingual (fluent): English and Spanish
2016-Present CAD Detailer Mc-2, Las Vegas NV/Kingman AZ
• Create 3d model of exhibit booth in cad, using standards, blocks, and custom build pieces to scale in AutoCAD
• Produce complete set up drawings to build exhibit booths. This includes Cover page, Baseplate layouts, carpet plans, electric, AV, air, rigging, floor plan, panel labeling plans, graphic elevations, details, section views, assembly drawings.
• Create shop drawings for custom structures for the shop to build, including finishes, hardware, dimensions.
• CNC programming using SolidCIM and RouterCIM for custom items being built in the shop
• Correct any redline corrections, additions, or modifications
• Plot set up packages in PDF form and hard copies using plotter
2015-2016 3D Plumbing Designer Universal Plumbing, LLC, Las Vegas NV
• Create 3D drawings using AutoCad and PD3D program from 2D CAD drawings.
• Create spool sheets for prefab in house, Bill of Material Lists, Layout and Dimensioning for layout of pipe during construction
• Verify that Footings will not hinder installation of in ground piping
• Verify that walls/chases are wide enough to fit WC carriers
2015-2015 Plumbing Designer Capital Engineering Consultants, Inc, Sacramento CA
2013-2015 Plumbing Drafter/Designer Strickler Associates, Fairfax VA
• Create construction and permit drawing sets for school remodels, church builds, build outs for business, using set standards.
• Researched existing plans for current locations of sanitary, storm, water, fire suppression and gas pipes.
• Create accurate demolition plans.
• Coordinate with Architect via email and phone for requesting chases, fixture relocation, updates, etc.
• Coordinate with Civil Engineer on pipes leading out of building to street, existing and new.
• Create detail new placement plans of Sanitary, Storm, water, and gas lines, including connections to existing lines inside and outside building, making sure all are up to current code.
• Create basic overview plans of fire protection for contractor to work off of for installation.
2013-2013 Civil Drafter Express Technologies, Fredericksburg, VA
• Utilize Google World and Google Maps to verify road layout, engineer's notes and GPS points to create the roadway system for cable layout.
• Properly place and label other cables, pipes and wires that are already in the ground near the location of the projected layout.
• Show details of the full layout of the cable’s location.
• Update drawings per contractor’s as-built notations.
2012-2012 Engineering Support Specialist Brazos Electric Cooperative, Waco, TX
2011-2012 Engineering Assistant/Drafter 1 Intern Brazos Electric Cooperative, Waco, TX
• Set up sheet sets for specific sites with the universal information, following specific company standards.
• Assisted drafters in making revisions to drawings.
• Worked independently and with team members, Engineers, and consultants on the remodel and construction of new sites. I worked on the sites from beginning to end.
• Plotted and printed the required number of sets, material lists, and specifications needed for the construction to begin.
• Created accurate and detailed Vicinity Maps for everyone involved in construction to get to the site; including written directions.
• Created record prints for the flat file after the work had been completed; making any changes needed to accurately reflect what is actually on site.
• Created new and updated existing single line and phasing diagrams of wiring schematics.
• Scanned multiple closed job files into the computer system in attempt to allow Brazos Electric Cooperative employees quicker and easier access to files through Electronic Document Management System. Also named files and organized according to company standards.
• Created step by step instructions for scanning in new documents for others to use.
2003-2011 Licensed Customer Service Specialist Farmers/StateFarm Oregon/Texas
• Check to ensure that appropriate changes were made to resolve customers’ problems.
• Complete contract forms, prepare change of address records, and issue service discontinuance orders, using computers.
• Confer with customers by telephone or in person in order to provide information about products and services, to take orders or cancel accounts, or to obtain details of complaints.
• Contact customers in order to respond to inquiries or to notify them of claim investigation results and any planned adjustments.
• Determine charges for services requested, collect deposits or payments, and/or arrange for billing.
• Keep records of customer interactions and transactions, recording details of inquiries, complaints, and comments, as well as actions taken.
• Obtain and examine all relevant information in order to assess validity of complaints and to determine possible causes, such as extreme weather conditions that could increase utility bills.
• Recommend improvements in products, packaging, shipping, service, or billing methods and procedures in order to prevent future problems.
• Refer unresolved customer grievances to designated departments for further investigation.
• Resolve customers’ service or billing complaints by performing activities such as exchanging merchandise, refunding money, and adjusting bills.
• Review claims adjustments with dealers, examining parts claimed to be defective and approving or disapproving dealers’ claims.
• Review insurance policy terms in order to determine whether a particular loss is covered by insurance.
• Solicit sale of new or additional services or products.
Education
2010-2012 Texas State Technical College Waco, TX
• Associate of Applied Science in Architectural Drafting
• Associate of Applied Science in Drafting & Design Technology (Mechanical/Electrical)
• GPA: 3.832
Associations
• Member of Phi Theta Kappa, (Fall10-2013)
• Member and Secretary/Treasurer of the on-campus Drafting Club, (Fall 2010-Sumer 2011)
• Skills USA Architectural Drafting and Quiz Bowl, member/competitor at state level for (2011)
• Skills USA Quiz Bowl, competitor at national level (2011)
• ASPE
Skills
• Software: strong knowledge of AutoCAD 2010-17, Microstation, iPlot and Descartes, Inventor 2012-13, Windows, Microsoft Office, Printers and Plotters
• Basic knowledge of SDS2, and Revit 2011
• Board drafting proficient
• Journeyman understanding Codes, Specifications and Contract Documents, and GD&T
• Bilingual (fluent): English and Spanish